3M™ 7837165694 H-700 Vented Hard Hat, HDPE, ANSI Electrical Class Rating: Class E and G, ANSI Impact Rating: Type I, Pin Lock Adjustment
|ANSI Electrical Class Rating||Class E and G|
|ANSI Impact Rating||Type I|
|Adjustment Type||Pin Lock|
|Type||Cap Style Non-Vented Short Brim|
3M™ H-700 series vented hard hat with 4-point ratchet suspension is comfortable, tough and lightweight protective headgear that helps protect the top-of the head due to the potential hazard of small falling objects or exposed fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. A 4-point ratchet suspension adjusts easily to allow for a customized height and fit that best suits the individual who wears the hard hat. The ratchet system allows tightening or loosening the fit without taking the hard hat off. Workers wearing this hard hat will also appreciate its low-profile design and balanced fit, which provide for a more comfortable and less obtrusive feel. A short brim allows for upward visibility, a feature that can enhance both safety and productivity. The soft brow pad cushions the forehead and is removable for easy replacement. For added versatility, the hard hat features accessory slots to accommodate 3M™'s cap mounted earmuffs , headgear, face shields, and welding helmets (all sold separately). A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, forestry, and mining. This hard hat meets requirements of ANSI/ISEA Z89.1-2014 type 1, class C. The hat may be worn in either the forward or reverse donning position. Hat weighs 12.8 ounces. The rigid shell of the 3M™ hard hat H-700 series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M™ hard hats reduce the impact if a strike occurs.
3M™, 7837165694, Hard Hat, Vented, Series: H-700, Orange, HDPE, ANSI Electrical Class Rating: Class E and G, ANSI Impact Rating: Type I, Pin Lock Adjustment
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.