- Low cost of ownership - Fastest sensor response times, lowest calibration gas flow rate on the market
- >4-year expected sensor life
- Stand alone bump tests reduce maintenance, increase productivity
- 1 device can monitor 2 gases
- Increased safety awareness and real time compliance - Stand alone bump test anytime, anywhere without specific calibration gas
- Bump pass, green LED flash every 15 sec, large on-screen checkmark
- Bump fail or expiration, red LED flash every 15 sec, no checkmark
- End of sensor life warning and alarm
- Full time traceability - Records 75 alarm events
- 150+ hours of periodic data
- 100+ hours of periodic data
- Compatible with MSA GALAXY® GX2 automated test system and MSA link pro software
- Rugged durability - Tough over-molded rubber armor
- Survives multiple 25 ft drops onto concrete
- Agency certified dust and water tight IP67 construction
- Intrinsically safe design
-
Specification Sheet
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/MSA_10154040_Specification_Sheet.pdf
-
Owners/User Manual
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/MSA_10154040_User_Manual.pdf
-
Owners/User Manual
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/MSA_10154040_User_Manual.pdf
-
Specification Sheet
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/MSA_10154040_Specification_Sheet.pdf
Alarm Type |
Vibrating |
Battery Type |
Lithium |
Detection Range |
0 to 2000 ppm |
Dimensions |
3-1/2 in L x 2-1/8 in W x 1 in D |
Display Type |
LCD |
Gas Type |
Carbon Monoxide |
Housing Material |
Polycarbonate |
Operating Temperature |
-10 to 40 deg C |
Resolution |
1 ppm |
Type |
Glow-In-The-Dark |
MSA Altair® 2X Gas Detector, Glow-In-The-Dark, Carbon Monoxide Gas, 0 to 2000 ppm Detection, Alarm: Vibrating, LCD Display, 1 ppm Resolution, -10 to 40 deg C Operating, Lithium Battery, Polycarbonate Housing Material, 3-1/2 in L x 2-1/8 in W x 1 in D Dimensions