3M™ 5303
  1. pin-int

3M™ 5303

3M™ 5303 5300 Splice Kit, 0 to 1000 VAC, 250 kcmil Conductor, 5.3 in L Splice, EPDM Rubber

Select Your Options

  • Item ID: A501423
  • MPN: 5303
  • Price: loading
  • Fast and simple installation
  • No torches or heat source required
  • No special tools required to install splice
  • Thick walls to resist puncture and abrasion damage
  • High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
  • Easy re-entry, can be used on cables with a rated operating temperature of 90 deg c and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 vac and less cables sized 16 AWG to 500 kcmil
  • 5/8 kV shielded and non-shielded feeder cables sized 8 AWG to 500 KCMIL, polyethylene cable, cross-linked polyethylene cable (xlp), ethylene propylene rubber cable (epr), copper conductors
  • 1-1/4 in maximum bolt length
  • 1.2 in id lug cover
  • 5.3 in lug cover length
  • 1400 psi tensile strength
  • 750% elongation
  • 365 V/mil dielectric strength
  • 1/case
  • 0 AWG to 250 kcmil feeder cable, 2 AWG to 250 kcmil motor lead conductor size
  • Designed to use with copper compression, 1-hole lugs
  • Slip-on lug cover is made of durable EPDM rubber
Cable Type      Shielded
Color      Black
Conductor Size      250 kcmil
Connector Type      Pigtail
Insulation Size      0.4 to 0.8 in OD
Material      EPDM Rubber
Number of Conductors      1
Series      5300
Splice Length      5.3 in
Temperature Rating      90 to 130 deg C
Voltage Rating      0 to 1000 VAC

3M™ motor lead pigtail splicing kits 5300 series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 V and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, 1-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M™ motor lead splicing kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ copper compression lugs 30000 series or other UL listed copper lugs can be used.

3M™, 5303, Splice Kit, Series: 5300, 0 to 1000 VAC, Shielded Cable, 250 kcmil Conductor, 0.4 to 0.8 in OD Insulation, 5.3 in Splice Length, 1 Conductors, Pigtail Connector, 90 to 130 deg C, EPDM Rubber, Black

  • Additional Part# 7626386
  • UPC: 054007122654

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.

Recently Viewed Items

    CONTACT US


    CUSTOMER SERVICE

    CONTACT US