3M™ 7100153234 Filter and Cartridge Combo, For Use With 3M™ Secure Click™ HF-800 Series Half Facepiece Reusable Respirator, P100 Filter Class
|Dimensions||121mm L x 93 mm W x 34 mm H|
|Suitable For Use With||3M™ Secure Click™ HF-800 Series Half Facepiece Reusable Respirator|
3M™ Secure Click™ Multi-Gas/Vapor Cartridge/Filter P100 D80926 is NIOSH-approved to help provide respiratory protection against certain multi-gas/vapors and oil and non-oil based airborne particulate contaminants. The D80926 Multi-Gas/Vapor/P100 cartridges/filters are for use with 3M™ Secure Click™ face pieces. Secure Click™ cartridges/filters utilize dual flow technology for easier breathing. 3M™ Secure Click™ Multi-Gas/Vapor Cartridge/Filter P100 D80926 has the Secure Click™ connection style. The 3M™ Secure Click™ connection style enables a quick, simple connection of the cartridges. Simply align the connections on the face piece and cartridge/filter and push until you hear a click. The innovative Secure Click connection helps provide wearers confidence that the cartridges/filters are installed properly. Also, the Secure Click cartridges/filters are dual-flow to allow easier breathing. Two dual flow cartridges/filters on each respirator combine to create four airflow paths in the world's first quad-flow cartridge/filter system providing greater breathability and comfort. The 3M™ Secure Click Multi-Gas/Vapor Cartridge/Filter P100 D80926 is NIOSH approved for use against certain organic vapors, sulfur dioxide, hydrogen chloride, chlorine/ammonia/methylamine/formaldehyde or chlorine dioxide or hydrogen fluoride or hydrogen sulfide and oil and non-oil based airborne particulate contaminants when used with approved 3M™ Secure Click™ face pieces. Refer to the 3M™ Respirator Selection Guide for a list of chemicals for which these cartridges/filters can be used. The D80926 is not for use in environments that are immediately dangerous to life or health (IDLH) or for sandblasting. Change 3M™ Secure Click Multi-Gas/Vapor Cartridge/Filter P100 D80926 in accordance to your well documented change-out schedule or earlier if smell, taste or irritation from contaminants is detected. Replace the cartridges/filters if it becomes damaged or if breathing becomes difficult. If used in environments containing only oil aerosols, replace the cartridges/filters after 40 hours of use or 30 days, whichever is first. 3M™ offers a free online tool to help you select the appropriate respirators, cartridges and filters for your workplace respiratory hazards and contaminants and help determine cartridge change-out schedules. 3M™ Select and Service Life Software (www.3M™.com/sls) contains.
3M™, 7100153234, Filter and Cartridge Combo, For Use With: 3M™ Secure Click™ HF-800 Series Half Facepiece Reusable Respirator, Multi-Gas, P100 Filter Class, 121mm L x 93 mm W x 34 mm H Dimensions
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.