Safety-Walk™ 7100056206 600 General Purpose Heavy Duty Pre-Cut Slip-Resistant Tread Tape, 24 in L x 6 in W x 0.036 in THK, Plastic Film Substrate, Solid Surface Pattern, Smooth Surface
|Material||Plastic Film Substrate|
|Type||General Purpose Heavy Duty Pre-Cut|
3M™ Safety-Walk™ slip resistant tapes and treads series 600 has been certified by the National floor safety Institute (NFSI) as providing "high-traction". A wet static coefficient of friction (SCOF) of greater than 0.6 was chosen by NFSI as the criteria for "high traction" because according to NFSI, floor surfaces maintaining this level of slip resistance when wet have proven to reduce slip and fall claims by between 50% and 90%.
Safety-Walk™, 7100056206, Slip-Resistant Tread Tape, General Purpose Heavy Duty Pre-Cut, Series: 600, 24 in Length, 6 in Width, 0.036 in Thickness, Plastic Film Substrate, Solid Surface, Smooth Surface
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.